|
|
Rheological properties of asphalt binders
Pěnčík, Michal ; Mondschein,, Petr (referee) ; Hýzl, Petr (advisor)
The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.
|
|
|
Design and evaluation of asphalt rubber mixture
Hotař, Petr ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The aim of bachelor thesis is to design the asphalt concrete for very thin layers using asphalt rubber and to perform laboratory tests according to ČSN EN 13108-2 and TP 148. The work is based on the literature review and respects properties of asphalt rubber. The expected properties of asphalt concretes for very thin layers are summarized and evaluated.
|
|
|
Usage of fast-reacting SBS polymer in the production of asphalt mixtures
Dohnálek, Jakub ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is a research of bituminous binder modification by fast react-ing polymer SBS. The theoretical part covers an introduction to bituminous binders, their pro-duction, chemical and physical-mechanical properties. The identification of bituminous binders and their use in bituminous mixtures is briefly described. To conclude, current modification methods are described in detail and important modifiers are introduced. In the practical part, three applied tests (softening point, elastic recovery and penetration) are described in detail. The bituminous binders tested (20/30, 30/45, 70/100, PMB 25/55-55 and PMB 45/80-50) and the fast-reacting polymer SBS are introduced. Samples with two weight percentages of SBS, 7,5% and 10%, are produced. Two mixing times, 60 seconds and 600 seconds were used to mix the bituminous binder and SBS. In conclusion, the results are evaluated and commented. Further research suggestions regarding this field are recommended.
|
|
|
Usage of fast-reacting SBS polymer in the production of asphalt mixtures
Dohnálek, Jakub ; Dašek, Ondřej (referee) ; Hýzl, Petr (advisor)
The subject of this diploma thesis is a research of bituminous binder modification by fast react-ing polymer SBS. The theoretical part covers an introduction to bituminous binders, their pro-duction, chemical and physical-mechanical properties. The identification of bituminous binders and their use in bituminous mixtures is briefly described. To conclude, current modification methods are described in detail and important modifiers are introduced. In the practical part, three applied tests (softening point, elastic recovery and penetration) are described in detail. The bituminous binders tested (20/30, 30/45, 70/100, PMB 25/55-55 and PMB 45/80-50) and the fast-reacting polymer SBS are introduced. Samples with two weight percentages of SBS, 7,5% and 10%, are produced. Two mixing times, 60 seconds and 600 seconds were used to mix the bituminous binder and SBS. In conclusion, the results are evaluated and commented. Further research suggestions regarding this field are recommended.
|
|
|
Rheological properties of asphalt binders
Pěnčík, Michal ; Mondschein,, Petr (referee) ; Hýzl, Petr (advisor)
The Diploma thesis is focused on rheological properties of bituminous binders and mixtures. Above all, it describes the changes of these properties of samples of bituminous binders and mixtures. Those were brought by the process of laboratory aging, since it simulates the changes occurring in the in the real-life conditions. The theoretical part depicts the field of rheology and methods utilized for simulating the ageing of binders and mixtures. The practical part describes the process of preparation of samples and its testing. Firstly, the ageing of bituminous mixture by the means of BSA method (Braunschweiger Alterung) took place, which was followed by preparing the solids for testing the modulus of stiffness and main testing. The rest of the mixture was used for extracting the binder. Tests with the binder were focused on the usage of dynamic shear rheometer (complex shear modulus, dynamic viscosity). The last part of the work is dedicated to the comparison of the outcomes of testing.
|
|
|
Design and evaluation of asphalt rubber mixture
Hotař, Petr ; Dašek, Ondřej (referee) ; Kudrna, Jan (advisor)
The aim of bachelor thesis is to design the asphalt concrete for very thin layers using asphalt rubber and to perform laboratory tests according to ČSN EN 13108-2 and TP 148. The work is based on the literature review and respects properties of asphalt rubber. The expected properties of asphalt concretes for very thin layers are summarized and evaluated.
|
guest ::
